top of page

19” DC Distribution Panelup to 18 RRU’s – 1HU with SPD | Leveres av Dekant


  • SLPDU100-01

 

Typically installed in the base station cabinet, this 1 HU 19” distribution panel is used for DC power management. It allows for up to 18 RRUs to be connected with a separation between Primary (battery buffered) and Secondary. The left and centre slots, up to 12 circuit breakers, belong to the same circuit. The right slot, up to 6 circuit breakers, is a separate circuit. The centre slot is supplied with a cover that can be removed on site, if required. Dummy covers to protect the individual open slots are sold separately on request. Input cables are connected from the back side with M6 cable lugs. They can be fixed to the distribution panel by the use of cable ties. An M6 grounding bolt can also be found at the back of the panel. A brush has been added at the back side of the distribution panel to protect against dust and small insects. Circuit breakers are not included as a standard. They will have to be ordered separately. See below part numbers. Pre-installed SPDs protect the unit against lighting strokes.

 

Last ned PDF under:

SLPDU100-01_DB
.pdf
Last ned PDF • 805KB




 

Dekant AS representerer og er en godkjent partner for Rosenberger Site Solutions i Norge.​

Vi leverer følgende produkter fra Rosenberger:

  • Coax Feeders, Jumpers & Connectors

  • FTTA / PTTA

  • Connectivity Boxes

  • Concealment and Streetwork Solutions

  • Passive DAS

  • Installation Material & Accessories

  • GPS over Fiber System

  • PIM Analyzer & Optical Test-kit


Kontakt oss på sales@dekant.no for mer informasjon.

 

 

Comments


bottom of page